Join Bespoke Performance, Pettit Racing UK, and Mazda on Track at the fantastic Snetterton 300 Circuit on July 26th, 2012.

Its a full day of Open Pitlane action, just for us, with a novice session to start with, to break everyone in, nice and gently.

3 Miles of beautifully laid out track, wih 2 hairpins, 2 long straights, and 2 great complexes onto the straights.

Tuition is available on request, so please get in touch to discuss what you might want. From a single session to all day private tuition.
The "Normal session" is an open pitlane session from 9 til 5 (approx).
Evening will be 6-9 (approx) and full day will be all sessions.

An extra driver can be booked to share a car, at a cost of £40

Every rotary needs Pettit Racing Protek R. A synthetic fuel lubricant developed by Pettit for use in their 24 hour endurance racing, it gives the rotary engine the extra lubrication it needs.

Designed to burn cleanly and give an even lubrication, across the entire engine (something the OMP oil injectors can easily fail to do), Protek R should be used in every tank of fuel.

Add 120ml per tank, prior to refilling the tank, or 240ml if on track. For race applications, higher blends can be used with race fuel.
Available in easy to use multi bottle packs, or economic 4L jerrycan


Find more about Protek R on Pettit's website

The ultimate accessories for the rotary enthusiast. The Rotor Alternator Pulley is available exclusively through Pettit Racing. It’s unique design will draw attention and make your engine bay stand out in a crowd. It’s made out of durable billet aluminum to last the test of time. It installs in minutes and allows you to use your same belt, however if your belts are old now is a good time to change them.

CNC machined aluminum with translucent tip inserts, hand polished and finished with a classy carbon inlaid RX-8 emblem. The perfect compliment to your 8’s dash, as well as its rotary engine. Both RX-8 & Pettit emblems included with every knob.

The rotor represents one of the three moving parts in your engine, two rotors, one shaft, and a great conversation piece. .NB - Not compatable with 2009 R3 RX8s

Easy to self install. Just pull off the old plastic dial, and replace with your Pettit knob

This shifter is best explained by the Axial Flow website (see below)

"The Axialflow Engineering Shifter is the best made anywhere by anyone. Typical construction is 303 stainless steel shafts, machined in house on our modern CNC equipment. Attached components are of like materials. Polymer parts are typically CNC machined from DuPont Delrin, an engineering polymer. Pivot pins are hardened to 60 on the Rockwell C scale. The engineering is aimed at optimizing the geometry for the shortest shift practical for road driving. We concentrate on "feel" or "quality" of the movement. Typically there is a reduction in the height of the knob for a better ergonomic relationship with the driver. The factory has to make compromises for the driver who is really not the sports type. We cater to the small segment who are looking for a real relationship with their car. It is hard to express the accuracy of placement and if you track your car this means better times. All Axialflow Shifters are warranted for the life of the car to the original buyer. If it ever wears or fails we will fix or replace it free, no questions asked. All you pay is the S&H, same as when you bought it. While we can't express the feeling, our customers can. "

RX8 R3 model NOW AVAILABLE! (R3 is facelifted 2009+ model)
Installation Guide

A beautully finished product, in either a silver finish carbon weave or dark carbon.
In car pic

A Japanese style tall gear knob, with a lovely heft and polished dark finish.

INITIAL PLAIN TOP PRODUCTION RUN> Initial run produced. Awaiting shipping arrival. ETA end March?

See in car image via link below

In car picture

Another beautiful Drift gear knob, with a lovely heft and polished dark finish.

Pettit Racing have launched Revomax oil in 2011 to complement their well known and successful Protek R fuel lubricant.

Rotaries are very reliant on oil for lubrication and cooling, and Pettit have made sure that Revomax delivers in all conditions, from the road to the track.
Designed to burn clean and lubricate consistently, Revomax is a new and essential ingredient for your rotary.
Pettit have long believed that the oil recommended by Mazda is not up to the job, and so developed Revomax to meet the high standards they think your rotary deserves.

Available in 4L "service" size Jerrycans, or in convenient 1L bottles so you always have some handy.

Design Engineerings fantastic range of temperature control products are must haves for a performance car.

Designed to improve radiator efficiency by maximising thermal transfer, it also helps resist corrossion, and improves warm up time.

Offering improved temps from 10 to an incredible 30 degrees LOWER by simple use of this affordable additive, we highly recommend it, whether for Nobles, TVRs or for track use with RX8s. We use it ourselves, and think you should too.

While driving and motorsport is fun, Bespoke performance always recommend keeping safety to the fore. But why not look great while doing it?

We are happy to offer both with this fantastic range of in cabin fire extinguishers, small and sexy looking, but with a punch to help control any unwanted flames. And lets face it, unless its shooting out of your exhaust pipe, pretty much any other flame is unwanted.....

Available in a range of anodised colurs, Blue, Red, Matt Grey, Black and Chrome they will add sparkle and security to your car.
They come in both foam and gas variants, but we highly recommend the gas units, which are much more capable as fire fighting units, although slightly more expensive. Price also varies on colour/finish choice.

The extinguishers come with a mounting braket which they clip into

Need to push out your stock wheels? Need to fit something crazy? Just bought wheels in the wrong offset? Wide arch kit making your wheels vanish?

Eibach have the answer. Their top quality wheel spacers allow you to adjust with confidence, with a full range of sizes for the RX8 from 5mm to 30mm

NOTE: A system has longer studs, B system has separate studs for the spacer collar

We recoomend the 15mm studs for ease of fitment with OEM wheels, but the 20mm will also fit.
HOWEVER: Please note that for the 15mm system to work you must check your wheels for scallops on the back of the hubs for the spacer nuts to fit into..
Some RX8 wheels have them, others dont. You must check all 4 wheels.

Sick of fiddly little cameras not recording what you want?
Cant afford pro setups?

HKS have provided the answer with their DMR system.

2 Cameras
GPS
Audio
Easy install
Simple Mini SD recording system
Instant usability
Software links to Google Earth / Google Maps

Fun and ingenious, record your daily drives, track days and then analyse the results

Sparcos entry level fullface helmet, the voayger is perfect for a track day enthusiast.
Made from ATM (Advanced Thermo Material) shell witha removable and cleanable inside lining, this is an ECE approved starter helmet.

Available in sizes from XXS to XXXL

NB This helmet is an entry level helmet, and neither fireproof, nor FIA homologated

The Club is the perfect starter open jet helmet ideal for track-day, but not fireproof or for FIA races(!)

Available in sizes S to XL
Has BSI 6658 (blu label) homologation.

Most trackdays will require 2 things of the driver in the apprel stakes. A helmet and long sleeves.

We recommend the Sparco slim fit long sleeved top. FIA approved. Fireproof, lightweight, cooling and with silver imbued antibacterial properties, drive in comfort and safety. And look good doing it!

Sizes from XS to XXXXL - colours Black or White

For a comfortable garment to wear in car to wick away sweat and stay light, but without the cost (and fireproofness and FIA homologation) the Sparco karting top is available for only £21 (same sizes and colours)

It might seem strange but after a few laps, you will be one of two things:

1. Firmly strapped into a full bucket seat & pressing on.

2. Wishing you had knee pads as you repeatedly jam your kness into the door and centre console for added stability.

These knee pads from Sparco will ensure you never enter category two, and for only £18 it's cheaper than getting set up for option 1!

(Also available as Nomex FIA Aprpoved race version - £50.50)

For a track day, we recommend the Sparco K-Formula low cut boot.
Stylish, with a 'heel & toe' pedal protector, its available in suede in black, red, blue, or leather in white.

Sizes (EU- 36 to 46)

Perfect for track days, the K100 offers high grip and padded palms. A great simple entry level glove
Available in Blue, Red or Black
Sizes XXs to XL